BLACK HI-TEMP PAINT

Refresh the look of your barbecue with a smooth, black coat of hi-temp paint that has been specifically made for reconditioning most gas, electric, and charcoal BBQs. Formulated with extra silicone for superior protection and coverage.

    • Suited for heat up to 1200˚F (648˚C)
    • 12 oz. aerosol spray can
    • For use on the outside of grill only

> DO NOT USE ON HOT GRILL OR GRILL IN OPERATION
> USE IN A WELL-VENTILATED AREA

BEFORE PAINT PREP WORK

  • The surface must be free of grease, rust & wax
  • Mask off or protect areas from overspray
  • Allow can to warm to room temperature before use
  • SHAKE can until metal ball rattles, then continue to shake for at least two minutes. When it stops rattling, you have shaken it up completely.

PAINTING

  • Move can with smooth, even, dusting strikes, letting paint become tacky between coats
  • Only apply enough paint for coverage; excessive spraying may result in runs
  • Never spray with the valve partially open; press the spray tip all the way down
  • If spray stops or becomes irregular, rotate spray head from side to side without removing from the valve. This will usually clear the spray head.
  • After use, invert can and spray for 2-3 seconds to clear the valve and spray tip before storing