7′-9″ Aluminum Lamp Post

  • Used for In-ground installations
  • Includes  1/4″ copper tubing internals with flared ends


Our Price


15% Off

In stock

When ordering a replacement part or product we recommend removing the original part and comparing it to what we list or what is referenced in your owner’s manual.

Made in America

7′-9″ Inground Aluminum Lamp Post

The 7′-9″ aluminum post includes 1/4″ copper tubing internals with flared ends and is used for inground installations.

If you want to install your lamp or torch on a deck or patio, please reference our POB6AI 6′ deck/patio aluminum post and ABA deck/patio base combination.

Dimensions 3″ outside diameter  |  7′-9″ Long
Color Black
Material Aluminum
Weight 9.5 lbs
Internals Copper (included)
Often purchased with ~OR~



Proper post and tubing selection are essential. Your local gas company or an authorized MHP Distributor can sup­ply these parts. ¼” soft copper tubing that has been in­ternally tinned is recommended. ¼” flare nuts should be used on both ends.

NOTE: The lamp is for outdoor Installation only and must be installed at least 12″ In any direction from any combustible materials.


  1. Dig a hole in the ground approximately 12″ wide by 24″ deep.
  2. Set the bottom of the post in the center of the hole. Brace the post in a plumb position and pour con­crete around the post to just below the level of the gas line access hole.


  1. If not already furnished, place the tubing in the post. Tubing should have at least two coils at the top of the post.
  2. Connect the gas supply line to the tubing at the base of the post and tighten the flare nuts clockwise. No sealants are necessary.
  3. Perform any remaining assembly to the lamp but do not install glass.
    • Install finial to rain cap.
    • Remove the valve and burner assembly from inside the lamp by inserting a screwdriver through the air holes at the base of the burner tube. Turn counterclockwise while holding the valve to keep it from turning.
    • Attach the valve to the gas supply tubing and tighten the flare nuts clockwise. Be sure the fittings are tight.
  4. Slowly lower the lamp onto the post, guiding the valve up through the center hole in the bottom of the lamp. Take care not to bend or crimp the tubing.
  5. Align the slot at the top of the post with the access hole in the collar. Align the valve stem with the access hole and tighten the lock screw in the collar of the lamp to secure the lamp to the post.
  6. Thread the burner tube onto the valve. Keep the valve from turning by inserting a screwdriver through the access hole.
  7. Be certain the lamp valve is in the off position before turning on the gas supply.
  8. Leaving the lamp valve in the off position, tum on the main gas supply and check all connections for leaks using a soapy solution. Tighten any leaky joints and recheck for leaks.

Prop 65 Warning CA Residents: Prop 65 Warning(s): YES

Weight 14 lbs
Dimensions 94 × 3.250 × 3.250 in



You may also like

  • All Items will be shipped via UPS. The customer can select the best method based on required delivery date and cost.
  • All orders placed after 1 pm (Central Time) will be shipped on the following business day regardless of service requested.

30-Day Return Policy:

At Modern Home Products we want you to be satisfied with the products you purchase; if you don’t feel satisfied for any reason, we allow a simple returns policy that allows you to return any new, unused, unassembled, and resalable items in their original packaging within 30 days of delivery for a refund. The refund issued will be for the total amount of the order minus original outbound shipping and any return shipping costs incurred by Modern Home Products. If your return is due to an error made by us, you will not be responsible for shipping costs.

  • If your return request is due to a product defect or damage, we will first attempt to work with you to repair the product; if repair is not possible, we’ll work on replacing it.
  • If your return will be returned to us via Freight service, we will require a photo of the item as you’ve packaged it in order to have a “before” image of the package to protect against any damage caused during return shipping.
  • Upon returning an item, be sure the product is clean, the packaging is sufficient to prevent damage, and you note your RMA number on the outside of the package.

If you’d like to return your item(s), please feel free to use our simple Return Form to obtain an RMA number (Return Authorization number) and we will process your return quickly.

Refund Eligibility:

To be eligible for a return, item(s) must be within 30 days of delivery in new, unused, unassembled, and resalable condition in the original packaging.

  • The cost of original outbound shipping will be deducted from your refund total.
    • A return shipping label can be available upon request but will be at your cost
  • For returns that require freight service, we can schedule a freight truck to pick up the returning item(s) but you will be responsible for the cost.
  • Refund will be applied to the same credit card, debit card, or another form of payment used at the time of the original transaction.
  • Once received, returns are usually processed within 3 days, and can take additional time for your bank to process the transaction.

Modern Home Products reserves the right to refuse a refund if:

  • The item returned does not match the original item shipped.
  • The returned item is missing parts or the original product’s packaging, either of which was not previously specified by the customer.
  • The item was damaged during the return shipment due to improper or insufficient packaging.
  • The item being returned has been used and is no longer in a new and resalable condition.


In many cases, an exchange may be made to ensure you get the exact item(s) you need. If you’d like to make an exchange contact us, and:

  • We will process an RMA/Exchange for the correct item(s)
    • At this time, you may purchase the new item(s) in order to get them shipped out sooner or,
    • You can return the incorrect item, once we receive the return we will ship out the new item(s).
  • Any additional costs will need to be paid for at the time of exchange.
  • Return shipping will still be your responsibility, though you will not be charged for original outbound shipping if an exchange is completed.

Keep on Grilling

Get grilling and maintenance tips, along with tasty recipes for your grill.

Grill Tips

Grill Tips

Maintenance Articles

Maintenance Articles



How-To Videos

How-To Videos